HOW TO MAKE SEE THROUGH GLASS AND SMOKE IN PHOTOSHOP

 For this tutorial, rather than use my own photos, I decided to grab a couple of images from Adobe stock: This way you can grab them yourself and follow along.

  

• The Surfer
• The Bottle
• The Smoke
• The Water

Become an Adobe Stock Contributor: 
10 free images from Adobe Stock 

EXTRACTING GLASS AND KEEPING CONTROL OVER THE TRANSPARENCY

STEP 1

Before I begin, let me proactively address a question I’ll get. “This glass is against a solid color, its easy compared to a complex background.” #1 I’m using Stock, why would you use a stock photo that has a complex background, choose a different photo. #2 if you are photographing it yourself. Why are you photographing objects with a busy background? Its so easy to set up a piece of seamless paper or even hold a sheet behind it. If you have a complex background, it’s better t reshoot or use a different image. However, if you are forced to use a complex image, I have a different tutorial for that here. 

 

Let’s begin by cutting out the glass bottle. This technique is going to give you a crazy amount of control and make the glass see through, you can control how see through it will be!  The first thing, is to use the quick selection tool.

Drag it over the white area to make a selection. If you go too far, you can exclude areas of the selection by alt/option and clicking with the tool.

Inverse the selection: Ctrl+Shift+I (Cmd+Shift+I mac)

STEP 2

To check how good your selection is, tap the “Q” key for quickmask

Here we need to clean it up a little bit on the edges.

Choose a small hard brush. Set the color to black and paint in the areas to touch up. (Tip: Click, hold down Shift and click again to draw a straight line)

Tap Q again to toggle back to a selection

STEP 3

Press Ctrl/Cmd+J to copy the selection to a new layer

We have now cut out the bottle shape, but not the transparency yet.

STEP 4

Let’s cut out the transparency, shall we?

Make sure the background is selected. (Hide the top layer for now)

Choose Select>Color Range

When Color range opens, choose Highlights from the Select menu

Adjust the Range until you see a nice clean silhouette of the bottle shape (Fuzziness at 0 for now)

Once the range is set, adjust the Fuzziness until you see a nice gray in the transparent area. (Black is selected, gray is semi transparent selected and white is unselected)

STEP 5

Click ok, and you will see marching ants on the bottle. Any areas that are less than 50% transparent won’t show marching ants, but will still be selected.

Make sure that the background is the active layer as shown here.

 

 

 

Click on the Mask button to mask out the transparency. (If yours look the opposite, undo, hold down Alt/Option as you click the mask button).

STEP 6

We are missing some key parts to the bottle, let’s fix that now.

Duplicate the Layer 1 (extracted bottle) layer by clicking on it and pressing Ctrl/Cmd+J or drag it into the new layer icon in the Layers panel

Hide the top layer. You should now see the bottle as opaque again.

Create a hidden mask, but Alt/Option clicking on the layer mask button.

 

Choose the brush tool and white as the foreground color

 

With the layer mask selected on the middle layer, paint around the edges of the bottle to make the important areas fully visible.

 

Now we have a really cool setup. Turn on the top layer and adjust the opacity to control the transparency of the bottle. Pretty neat huh?

STEP 7

Let’s composite it into another photo, while keeping the setup so we can change our glass transparency.

Before we move it into another photo, let’s box everything up, just like you would with your stuff if you were moving house.

Select all the layers and Press Ctrl/Cmd+G to move it all into a group. I named the group, bottle

COMBINING PHOTOS IN PHOTOSHOP

Make sure your destination photo is open in Photoshop. (The surfer girl).

STEP 8

With the move tool (V) drag your bottle into the tab at the top for the new image (Don’t release yet) wait for the image to open and then move your pointer into the middle of the new document. Release, and your bottle group has been added to the surfer photo. How to combine images in Photoshop made easy.

Scale and position the bottle (Ctrl/Cmd+T to resize the bottle)

If you expand the bottle group, you will see that you can still adjust the transparency. This is important, because you can see it better on a background and probably want to reduce the transparency a little bit.

CREATING LENS REFRACTION IN PHOTOSHOP

We have added the bottle, but it’s still missing a little something to make it look realistic. That is called refraction. Refraction is how something distorts through a lens, that lens could be eyeglasses, water drops, glass or any transparent object that isn’t perfectly flat. This will change our image from a bottle slapped on to a photo, into a well composited glass object in a scene. Here we go…

STEP 9

Hold Ctrl/Cmd and click on the layer thumbnail of the bottle (top layer) this loads the selection for the bottle.

Choose the Background in the Layers panel

 

Press Cmd/Ctrl+J to copy a selection of the background to a new layer.

 

Hide the Bottle group so we can see the selected layer (you won’t see anything different yet)

 

Here is the selected layer in the shape of the bottle. Let’s distort it!

STEP 10

Choose Filter>Distort>Spherize  (You could use any of the distort tools, including liquify for this step)

 

Click ok to apply the effect to the selection. Sometimes you might need to apply it again if the result isn’t strong enough (Ctrl/Cmd+F)

 

Ctrl/Cmd+D to turn off the selection.

Turn our bottle layers back on and lookie! We have glass refraction. Cool!

 

CUTTING OUT SMOKE IN PHOTOSHOP

Now we are going to cut out smoke and do a little tweaking for a cool effect. I’m really doing this so you can see how to cut out vapors in Photoshop as well as a cool creative idea.

STEP 11

Start with the smoke image

As before, choose Select>Color Range

Grab highlights again and use the settings shown here.

Click ok

The smoke is selected.

STEP 12

Click on the add layer mask button (Rectangle with a circle in the middle)

Now you have the smoke masked out

Make sure you choose the layer and not the mask in the layers panel.

STEP 13

Drag it into our composite image exactly the same way we did with the bottle.

(Note: The process for selecting water and liquids is identical, but you can easily make liquid brushes, which are great for splashes)

Drag the smoke layer to the top of the layer stack

Position and size the smoke to suit your tastes.

COLORIZING VAPOR IN PHOTOSHOP.

Let’s add some color to the smoke

STEP 14

Create a new Hue/Saturation adjustment layer by clicking the yin/yang shape at the bottom of the layers panel and choosing Hue/Saturation

Right now if I make adjustments, it will affect the entire image, I only want to change the smoke

Click the clip to layer icon at the bottom of the properties panel to isolate the adjustment to only the layer beneath the adjustment layer (our smoke layer)

 

Make some adjustments to add an aqua hue to the smoke. Notice that lowering the Lightness slightly allows us to add color to white.

STEP 15

Here is the image and the layers panel visible after the adjustments. Adjust the Opacity of the smoke to blend it in nicely.

 

If I hide the background you can see the work we have done on the transparency. Didi you think you would be doing this in Photoshop? It’s fun!

 

FINISHING TOUCHES

Here is a step I like to perform on all my composites (another word for collages). Let’s do some overall grading in Camera Raw (Photoshop CC step only)

STEP 16

Let’s make a layer on top that contains all the layers combined.
Select all the layers and Press Ctrl+Alt+Shift+E (Cmd+Option+Shift+E Mac).

With our new, top layer active choose Filter>Camera Raw Filter

You can see the adjustments I made to the color and tone, to give a little more pop to the image.

And here is the final.