Skip to main content

Papercraft Text Effect

Papercraft text effect
Wired Magazine introduced on the September 2008 issue a new headline design created by Mario Hugo. This cool headline design struck me with its beauty and simplicity. So I decided to turn this effect into a Photoshop tutorial. Although the effect is a bit different, all credit should be given to Mario Hugo.
Since he designed a custom typeface for these headlines, I had to find some similar typefaces to apply this effect. The first and obvious choice was the popular Baby Teeth font. Fortunately there are a lot of free alternatives, and one of them is Disco Deck by Iconian Fonts.

As usual, my tutorials are very long. It is not that the effect is difficult to achieve. In fact it is very easy. It is just because I don´t want to leave beginners out in the cold. Each step, no matter how easy it is, is explained in detail. Of course, I can unintentionally leave something unexplained, but I expect everybody, with a minimum Photoshop experience, to be able to follow the tutorial and reach the final result.
Hope you like this effect and if you come up with the same effect using a different font, please leave a link at the comments section, as usual.

Create the Background

Go to FILE > NEW… and create a new 600px x 200px document with a white background. Check the image below if you are unsure about the settings.
Now let´s create the gradient for the background. In fact, this is the gradient that we will be using for the text effect. It simply looked nice as the background too. 1 – Select the Gradient tool. 2 – Click on the gradient and the gradient editor window will open.
1 – Create the new gradient using the settings in image below.
2 – Click on the NEW button and give it a recognizable name.
3 – The new gradient will appear on the gradients library.

Select the gradient tool and then from the gradients pull down menu (1), choose the gradient we´ve just created (2). Select the ANGLE GRADIENT option (3).

Check the image below to see how to apply the gradient. Place the cross on the top left corner of the image and drag it to the right.
It is very important to start (point 1) the gradient at the very top left corner of the image or even outside the image, but never inside the image, it won´t look good.
Since we are using the ANGLE GRADIENT option, it doesn´t matter where you release the mouse (point 2) as long as you keep the line horizontal.

You should get a result similar to this one:

Prepare the Text

This stage involves much more than typing a word. You will have to create a layer for each character of the word. That´s because we will be using Layer Styles. And each letter will have its own Layer Style assigned to it.
Before starting, download the Disco Deck font and install it on your system. To install a font on your system follow these instructions for MAC or PC
After installing the font, select the Text tool, set 150px as the font size, and type the letter C.

Press CTRL + ENTER (on PCs) or COMMAND + RETURN (on MACs) to release the tool. Click again with the text tool and a new text layer will be created. Type the letter R and release the tool again by pressing CTRL + ENTER (on PCs) or COMMAND + RETURN (on MACs). Do the same over and over until you have all the five letters on a different text layer each:


Now we are going to arrange the letters to get the overlapped look of the final effect.
That should be fairly easy. Just select the MOVE tool, check the AUTO SELECT option, and drag each letter closer to the other and overlap them as much as you want.

Creating and Applying the Papercraft Effect Layer Style

To achieve the shaded paper effect we will create a single Layer Style and will apply it to each letter. Since each letter´s shape is different from the other, we will have to change the shading effect for each one. Go to the LAYERS PALETTE and select the layer with the letter C in it. Then choose GRADIENT OVERLAY from the Layer Effects popup menu.

Copy the following settings, and keep the window open. DON´T press OK yet. Remember to use the new gradient we have already created some steps before:

Now click on the DROP SHADOW Layer Effect and use the following settings. Keep the window open, DON´T press OK yet.

Click on the STYLES option on the top of the window and then click on the NEW STYLE button and give it a name. The newly created style will show last on the list of styles. Now you can press OK to close the LAYER STYLES window.:

To apply the new style to each letter you must select a layer (1) and then click on the new style on located on the STYLES PALETTE (2).

Repeat the same for each letter. Don´t worry about the results. They will look incorrect but we will deal with that later. You will end up with something like this:

Giving the Final Touches to the Papercraft Effect

Although the effect is complete, the simulated paper cuts don´t look good. Let´s correct that. Go to the LAYERS PALETTE, select the layer with the letter R and click on the tiny arrow at the right (1). This will display all the Layer Effects of the text layer. Double click on the GRADIENT OVERLAY effect (2). This will open the LAYER STYLES window displaying the Gradient Overlay settings.

Move the LAYER STYLE window until you can see the letter R. You should do this because you can only edit the gradient position of the letter R while the LAYER STYLE window is open.

First, type -90 in the Angle setting of the Gradient Overlay window or you can also drag the gradient angle selector until it reads -90 degrees. DON´T CLOSE THE LAYER STYLES WINDOW YET.
You will see how the letter R gradient has changed its rotation and it is vertical instead of horizontal. In the next step we will move the gradient a little bit to the left to make it look better.
You should still have the LAYER STYLES window open. If not, then open it as explained a couple of steps above. Now check at the top of the screen and you will se a message that says Click and drag to reposition the gradient. This means that while the LAYER STYLES window is open, you will be able to exactly click and drag the gradient inside the letter R, and reposition it at will.
When you are done, close the LAYER STYLES window. You image should now look like this one:

To reach the desired result, you should continue tweaking the rest of the gradients until they look like the final result. Check the image below to see a diagram of the changes you should make:

Giving a Touch of Color

The effect is finished. Since each letter has its own Layer Style, you can change the color of the gradient to whatever you want, as long as you keep the sharp paper cut shading effect. Let´s do something simple. Create a new layer at the top of all layers. 1 – Select the last layer (the T layer in this example). 2 – Click on the ADJUSTMENT LAYER icon and select SOLID COLOR. 3 – A new color fill layer will be created and the color picker window will open at the same time.

Choose a color. Any color you want. You will be able to change it later. In this case we used #FFA200. Click OK and the layer will be filled with that color.

After that, Go to the LAYERS PALETTE and from the BLENDING MODES pull down menu (1), select SOFT LIGHT (2).

Finally! Here´s the finished Papercraft Text Effect. Try it with different fonts and with different colors. Post your results on the comments section at the end of this article.

Comments

Popular posts from this blog

Use x-ray techniques in Photoshop to show naked skin through clothing

    Do those new naked body scanners have you freaked out at the airports? As far as the TSA is concerned, those x-ray machines are here to stay, but you might as well take comfort in knowing that airport security guards aren't the only ones looking at your private parts. Practically anyone with a computer can manage to see through your clothes, and it's all thanks to a little program called Photoshop. Thanks, Adobe. With a few tweaks using the tools in Photoshop, you can see those boobs in no time, male or female. The video is in German, but it's not hard to figure our what's going on, especially if you're familiar with Photoshop. First, create a few duplicate layers, then get a handle on some of these tools to make the naked body through the clothes: * Auswahl erstellen (Create Selection) * Tonwertspreizung (Input Levels) * Belichtung (Exposure) You can also do this see-through clothing effect in free design programs, such as  GIMP .

40 latest creative photoshop text effects

Create a Glowing Liquid Text with Water Splash Effect in Photoshop In this tutorial, we will show you the steps we took to create a Glowing Liquid Text Effect in Photoshop. We will be practising the use of liquify filter, layer blending options, as well as some image adjustments. Create a Realistic Wooden 3D Text Image In this tutorial we are going to take a few 2D textures as well as a few Photoshop techniques to create a realistic 3D text image. Easy X-Ray Typography In Photoshop In this tutorial we will show you how to create a simple x-ray effect of a letter, in this case the Abduzeedo logo A. The whole process is quite simple but it will require a couple of hours to pull it off. Easy Furry Text In Photoshop In this tutorial we will show you how to create a really cool and super simple furry text in Photoshop CS6. We will use basic filters and tools but it’s nice to say that we took advantage of the a new feature in Photoshop CS6 that is to apply layer...

Royal 3D Text Effect in Photoshop CS6

  Just make sure to check the 3D settings under Edit -> Preferences -> Performance, and Edit -> Preferences -> 3D. Default values should work fine, but if anything seems to be not working properly you can always check those settings. Step 1 - Create a new 1600 x 1200 px document and Fill the Background with black. Create the text in white using the font Dunkin Sans. The font size is 400 pt and the text is better written in All Caps (if you’re not using only numbers). Step 2 - With the text layer selected, go to 3D -> New Extrusion from Selected Layer. This will instantly convert the text layer into a 3D layer. All the 3D scene elements can be found in the 3D panel (Window -> 3D). Click the main mesh name to edit its settings. - The 3D Mesh settings and attributes can be accessed and modified through the Properties panel (Window -> Properties). If you scroll down the Properties panel you’ll find the Character Panel button, which ...